TC1411NEPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 3.68mm |
| Length | 9.78mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NEPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Gate drivers is packaged in the way of Tube.This configuration includes 1 drivers.Through Hole is the way in which it is mounted.In the absence of a power supply voltage of 4.5V~16V V, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.-40°C~150°C TJ is the allowed temperature range for this device.The input type for this program is Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number TC1411N.Mosfet driver is mounted using Through Hole.A total of 8 pins are available on the device.A voltage of 16V is required for its operation.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.Mosfet driver is possible to achieve a maximum output current of 1A.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has a total of 8 component pins.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.
TC1411NEPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1411NEPA Applications
There are a lot of Microchip Technology TC1411NEPA gate drivers applications.
- Portable Navigation Devices
- Commercial and agricultural vehicles (CAV)
- Topologies
- High current laser/LED systems
- Video amplifiers
- General Purpose 3-Phase Inverter
- High power buffers
- Motor Control
- Telecom switch mode power supplies
- Solar power supplies
