TC1411NEUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NEUA713 Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is adopted for higher flexibility.Tape & Reel (TR) is the form of the package.There are 1 drivers installed for this device.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~16V.Gate type N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC1411N.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.In addition, it is specifically designed to operate with a supply voltage of 16V.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.1A is the maximum output current.Several electronic components are included in its subcategory of MOSFET Drivers.A board with 8 component pins is available.Using 340mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.
TC1411NEUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1411NEUA713 Applications
There are a lot of Microchip Technology TC1411NEUA713 gate drivers applications.
- Pulse transformer drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Broadcast equipment
- Refrigerator
- Portable Navigation Devices
- UPS systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Portable computers
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
