TC1411NVOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 470mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NVOA713 Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.There is a package in the form of Tape & Reel (TR).The configuration is supported by 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC1411N.Mosfet driver is mounted using Surface Mount.When the device is designed, it has 8 pins.The device is specifically designed to operate at 16V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1A can be achieved at maximum power.The board has a total of 8 component pins.Its maximum power dissipation of 470mW shows its power loss capacity without overheating.
TC1411NVOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1411NVOA713 Applications
There are a lot of Microchip Technology TC1411NVOA713 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- RGB applications
- UPS systems
- Motor Control
- Isolated switch mode power supplies (SMPS)
- DC-DC Converters
- Dual-Battery Systems
- Isolated Supplies for controller area network (CAN),
- Commercial air-conditioning (CAC)
- Motor controllers
