TC1411NVUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TC1411N |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 340mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NVUA713 Overview
In order to increase flexibility, the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is used.Gate drivers is package in Tape & Reel (TR) case.There are 1 drivers installed for this device.In the direction of Surface Mount, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~16V.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.It's configured with 8 terminations.There are various parts that can be found under its base part number TC1411N.The mount method is Surface Mount.In the device, there are 8 pins.This device operates with 16V supply voltage.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1A.According to its maximum power dissipation, 340mW is capable of conducting and transferring a large amount of power without overheating.
TC1411NVUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1411NVUA713 Applications
There are a lot of Microchip Technology TC1411NVUA713 gate drivers applications.
- General Purpose 3-Phase Inverter
- Multicolor LED/laser displays
- Automotive Applications
- serial peripheral interface (SPI), I2C
- Portable Media Players
- High-speed communications
- Solar inverters
- Isolated Supplies for Motor Control
- Line drivers
- Isolated Gate Driver Supplies
