TC1411VPA
| Parameters | |
|---|---|
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 3.683mm |
| Length | 9.779mm |
| Width | 6.604mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 14Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | TC1411 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 730mW |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
TC1411VPA Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.There is a package in the form of Tube.Configuration is supported by 1 drivers.Through Hole is the way in which it is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~16V.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.Temperature range -40°C~150°C TJ is allowed for this device.Inverting is used as the input type in this program.As a result of its configuration, it contains a maximum of 8 terminations.There are various related parts under its base part number TC1411.In this case, Through Hole indicates how the device is mounted.When the device is designed, it has 8 pins.A supply voltage of 16V is required for operation.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1A.Its subcategory of MOSFET Drivers contains various useful electronic components.Components with 8 pins are available.The maximum power dissipation of 730mW shows its maximum capability to transfer and conduct power loss without overheating.Device operation requires a resistance of 14Ohm.
TC1411VPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 14Ohm
TC1411VPA Applications
There are a lot of Microchip Technology TC1411VPA gate drivers applications.
- Motor Controls
- Solar power supplies
- Motor Control
- High frequency line drivers
- Head-up and Head mounted displays
- Motor controllers
- Industrial Modules
- Isolated switch mode power supplies (SMPS)
- Pulse transformer drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
