TC1411VUA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 14Ohm |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TC1411 |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 340mW |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411VUA Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Tube is the packaging method.Gate drivers is configured wGate driversh 1 drivers.Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~16V supply voltage.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.For this device, the temperature range is -40°C~150°C TJ.Inverting is used as its input type.The configuration starts with 8 terminations.Under its base part number TC1411, various related parts can be found.The device is mounted using Surface Mount.In the device, there are 8 pins.A voltage of 16V is required for its operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 1A.According to its maximum power dissipation, 340mW is capable of conducting and transferring a large amount of power without overheating.Resistance 14Ohm is used for operation.
TC1411VUA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
Resistance of 14Ohm
TC1411VUA Applications
There are a lot of Microchip Technology TC1411VUA gate drivers applications.
- Refrigerator
- 3-Phase Motor Inverter Driver
- Line drivers
- High-voltage isolated DC-DC converters
- Commercial air-conditioning (CAC)
- General Purpose 3-Phase Inverter
- Pulse transformer drivers
- Smart Phones
- Telecom switch mode power supplies
- High power buffers
