TC1411VUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TC1411 |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 340mW |
| Propagation Delay | 40 ns |
| Input Type | Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411VUA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) represents the package.Gate drivers is configured wGate driversh 1 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 4.5V~16V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Inverting is used as the input type.There are 8 terminations to form the base of its configuration.Numerous related parts are available for its base part number TC1411.In this case, Surface Mount indicates how the device is to be mounted.There are 8 pins available in the device.In addition, it is specifically designed to operate with a supply voltage of 16V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 1A.The maximum power dissipation of 340mW shows its maximum capability to transfer and conduct power loss without overheating.
TC1411VUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1411VUA713 Applications
There are a lot of Microchip Technology TC1411VUA713 gate drivers applications.
- Motor Control
- Portable Media Players
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
- Isolated switch mode power supplies (SMPS)
- RGB applications
- Line drivers
- DC/DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
