TC1412COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1412 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1412COA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Configuration is based on 1 drivers.There is a mounting bracket in the way of Surface Mount.In the absence of a power supply voltage of 4.5V~16V V, it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.The input type for this program is Inverting.Mosfet driver is based on 8 terminations.There are numerous related parts listed under its base part number TC1412.The device is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Mosfet driver is possible to achieve a maximum output current of 2A.There are several useful electronic components within its subcategory MOSFET Drivers.The board has a total of 8 component pins.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.
TC1412COA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1412COA713 Applications
There are a lot of Microchip Technology TC1412COA713 gate drivers applications.
- PCMCIA applications
- 3-Phase Motor Inverter Driver
- High current laser/LED systems
- Power factor correction (PFC) circuits
- Smart Phones
- Motor controllers
- Motor Control
- Isolated switch mode power supplies (SMPS)
- High power buffers
- LCD/LCoS/DLP portable and embedded pico projectors
