TC1412NCOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1412N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1412NCOA Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A package of Tube has been used.There is a mounting bracket in the way of Surface Mount.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.Its configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC1412N.Mosfet driver is mounted using Surface Mount.During design, it is configured with 8 pins.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is a maximum output current of 2A that can be achieved.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board contains 8 pins for component connections.The basis has 1 integrated outputs.Its maximum power dissipation of 470mW shows its power loss capacity without overheating.
TC1412NCOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1412NCOA Applications
There are a lot of Microchip Technology TC1412NCOA gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
- Topologies
- Motor Controls
- serial peripheral interface (SPI), I2C
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- Uninterruptible Power Supplies (UPS)
