TC1412NEPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1412N |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Height | 3.68mm |
| Length | 9.78mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1412NEPA Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.Tube represents the package.The configuration is supported by 1 drivers.In the direction of Through Hole, gate drivers is mounted.In the absence of a 4.5V~16V supply voltage, its superiority can be demonstrated.Gate type N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC1412N.Mosfet driver is mounted using the Through Hole method.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Components with 8 pins are available.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.
TC1412NEPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1412NEPA Applications
There are a lot of Microchip Technology TC1412NEPA gate drivers applications.
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- High-voltage isolated DC-DC converters
- Commercial air-conditioning (CAC)
- Refrigerator
- Isolated Supplies for Motor Control
- Portable Media Players
- Broadcast equipment
- Motor Drives
