TC1412NEUA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1412N |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1412NEUA Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Gate drivers is package in Tube case.A total of 1 drivers are integrated into its configuration.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~16V.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration starts with 8 terminations.Many related parts can be found under its base part number TC1412N.Mosfet driver is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.This subcategory of MOSFET Drivers has a number of useful electronic components.There are 8 component pins on the board.Its maximum power dissipation of 340mW shows its power loss capacity without overheating.
TC1412NEUA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1412NEUA Applications
There are a lot of Microchip Technology TC1412NEUA gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Solar power supplies
- Commercial air-conditioning (CAC)
- DC/DC converters
- Portable computers
- High-speed communications
- Motor Controls
- High power buffers
- Welding
- Line drivers
