TC1412NEUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1412N |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1412NEUA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The packaging method is indicated by Tape & Reel (TR).The configuration is supported by 1 drivers.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 4.5V~16V supply voltage, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.The configuration is based on 8 terminations.Many related parts can be found under its base part number TC1412N.Mosfet driver is mounted using Surface Mount.There are 8 pins available in the device.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has 8 component pins.Based on the maximum power dissipation of 340mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.
TC1412NEUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1412NEUA713 Applications
There are a lot of Microchip Technology TC1412NEUA713 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
- Telecom switch mode power supplies
- Solar power supplies
- Topologies
- Industrial Power Supplies
- Pulse transformer drivers
- High power buffers
- High-voltage isolated DC-DC converters
- Motor controllers
