TC1413COA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Height | 1.55mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413COA Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tube is used.1 drivers are incorporated for its configuration.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4.5V~16V V, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~150°C TJ.Inverting is used as its input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number TC1413.In this case, Surface Mount indicates how the device is mounted.Devices have 8 pins available.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.3A is the maximum output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has 8 component pins.Its maximum power dissipation of 470mW shows its power loss capacity without overheating.For higher stability, the supply current should be kept at 1mA.
TC1413COA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1413COA Applications
There are a lot of Microchip Technology TC1413COA gate drivers applications.
- Smart Phones
- Commercial and agricultural vehicles (CAV)
- Uninterruptible Power Supplies (UPS)
- PCMCIA applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Video amplifiers
- Telecom switch mode power supplies
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Head-up and Head mounted displays
