TC1413CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1413 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413CPA Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.There are 1 drivers installed for this device.Through Hole is mounted in the way.A supply voltage of 4.5V~16V demonstrates its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.Temperature range 0°C~150°C TJ is allowed for this device.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver is based on 8 terminations.Numerous related parts can be found under its base part number TC1413.Mosfet driver is mounted using Through Hole.The pins are configured with 8 when designing the chip.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 3A limit to the output current.There are several useful electronic components in this subcategory of MOSFET Drivers.The board has a total of 8 component pins.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 1mA.
TC1413CPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1413CPA Applications
There are a lot of Microchip Technology TC1413CPA gate drivers applications.
- PCMCIA applications
- serial peripheral interface (SPI), I2C
- Refrigerator
- Digitally controlled power supplies
- High power buffers
- RGB applications
- Solar inverters
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Smart Phones
