TC1413EOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Height | 1.55mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413EOA Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A packaging method of Tube is indicated.Surface Mount is mounted in the way of the device.When the supply voltage is set to 4.5V~16V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.This program uses the input type of Inverting.It's configured with 8 terminations.There are various related parts under its base part number TC1413.Mosfet driver is mounted using Surface Mount.When the device is designed, it has 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.An output current as high as 3A can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 8 component pins is available.Based on its basis, it integrates 1 outputs.Based on its maximum power dissipation of 470mW, it is clear that it is capable of transferring and conducting power loss without overheating.To increase stability, keep the supply current at 1mA.
TC1413EOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1413EOA Applications
There are a lot of Microchip Technology TC1413EOA gate drivers applications.
- Commercial air-conditioning (CAC)
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
- Portable Navigation Devices
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Modules
- Dual-Battery Systems
- RGB applications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
