TC1413EUA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413EUA Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package offers greater flexibility.The packaging method is indicated by Tube.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Surface Mount is the way in which it is mounted.In the absence of a 4.5V~16V supply voltage, its superiority can be demonstrated.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.The configuration is based on 8 terminations.Many related parts can be found under its base part number TC1413.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible for the output current to be as low as 3A.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Its maximum power dissipation of 340mW shows its power loss capacity without overheating.Keeping the supply current at 1mA ensures greater stability.
TC1413EUA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1413EUA Applications
There are a lot of Microchip Technology TC1413EUA gate drivers applications.
- Solar power supplies
- Video amplifiers
- Digitally controlled power supplies
- Isolated Supplies for controller area network (CAN),
- Portable Media Players
- High-speed communications
- DC-DC Converters
- Portable Navigation Devices
- Commercial air-conditioning (CAC)
- Uninterruptible Power Supplies (UPS)
