TC1413NCOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413N |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413NCOA713 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A package of Tape & Reel (TR) has been used.The configuration is supported by 1 drivers.There is a mounting bracket in the way of Surface Mount.Using a 4.5V~16V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This gate type has a N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to 0°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number TC1413N.Surface Mount is the way it takes to mount the device.As a result, it is configured with 8 pins when it is designed.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 3A.There are several useful electronic components within its subcategory MOSFET Drivers.Components with 8 pins are available.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1mA.
TC1413NCOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1413NCOA713 Applications
There are a lot of Microchip Technology TC1413NCOA713 gate drivers applications.
- Head-up and Head mounted displays
- AC-DC Inverters
- Telecom switch mode power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Modules
- Motor Drives
- Commercial and agricultural vehicles (CAV)
- Motor Controls
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
