TC1413NCPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1413N |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413NCPA Overview
There is greater flexibility with the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is used.Its recommended mounting way is Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~16V.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.This program uses the input type of Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts can be found under its base part number TC1413N.The mount method is Through Hole.There are 8 pins available in the device.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3A that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Components with 8 pins are available.For its basis, there are 1 outputs integrated.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended to keep the supply current at 1mA to ensure greater stabilMosfet gate driversy.
TC1413NCPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1413NCPA Applications
There are a lot of Microchip Technology TC1413NCPA gate drivers applications.
- Digitally controlled power supplies
- High-speed communications
- High current laser/LED systems
- Refrigerator
- Portable Navigation Devices
- Smart Phones
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Broadcast equipment
- Industrial Modules
- A/D drivers
