TC1413NEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413N |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413NEOA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A package of Tape & Reel (TR) has been used.1 drivers are incorporated for its configuration.Its recommended mounting way is Surface Mount.In the absence of a 4.5V~16V supply voltage, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.Its configuration starts with 8 terminations.Many related parts can be found under its base part number TC1413N.The mount method is Surface Mount.In the device, there are 8 pins.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is an output current limit of 3A for this device.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.This device has a maximum power dissipation of 470mW, indicating that it is capable of reducing power loss without overheating.If you want a stable supply current, you should keep it at 1mA.
TC1413NEOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1413NEOA713 Applications
There are a lot of Microchip Technology TC1413NEOA713 gate drivers applications.
- Multicolor LED/laser displays
- Industrial Modules
- Smart Phones
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
- A/D drivers
- Motor Control
- Line drivers
- Isolated Supplies for Motor Control
- Broadcast equipment
