TC1413NEPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1413N |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ps |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413NEPA Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the packaging method.For its configuration, it incorporates 1 drivers.In the direction of Through Hole, gate drivers is mounted.In the absence of a power supply voltage of 4.5V~16V V, it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.-40°C~150°C TJ is the allowed temperature range for this device.This program uses the input type of Non-Inverting.Initially, the configuration is composed of 8 terminations.Under its base part number TC1413N, various related parts can be found.You mount it with Through Hole.The pins are configured with 8 when designing the chip.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 3A.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.According to its maximum power dissipation, 730mW is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 1mA.
TC1413NEPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1413NEPA Applications
There are a lot of Microchip Technology TC1413NEPA gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for controller area network (CAN),
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for Motor Control
- White Goods - Air Conditioner, Washing Machine,
- Power factor correction (PFC) circuits
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High-speed communications
- Portable computers
