TC1413NEUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1413N |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 340mW |
| Max Supply Current | 1mA |
| Propagation Delay | 45 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 28ns |
| Fall Time (Typ) | 28 ns |
| Rise / Fall Time (Typ) | 20ns 20ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1413NEUA713 Overview
A higher degree of flexibility is achieved by adopting its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.Tape & Reel (TR) represents the package.A total of 1 drivers are integrated into its configuration.Surface Mount is mounted in the way.By using 4.5V~16V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Non-Inverting is used as its input type.Mosfet driver is based on 8 terminations.The base part number TC1413N refers to a number of related parts.The mount method is Surface Mount.There are 8 pins available in the device.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 3A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.There are 8 component pins on the board.340mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 1mA.
TC1413NEUA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC1413NEUA713 Applications
There are a lot of Microchip Technology TC1413NEUA713 gate drivers applications.
- Pulse transformer drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High current laser/LED systems
- Dual-Battery Systems
- UPS systems
- Video amplifiers
- Commercial and agricultural vehicles (CAV)
- Industrial Motor Inverter - Power Tools, Robotics
- Automotive Applications
- Solar inverters
