TC1426COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1426 |
| Pin Count | 8 |
| Max Output Current | 1.2A |
| Power Supplies | 4.5/16V |
| Nominal Supply Current | 13mA |
| Power Dissipation | 470mW |
| Max Supply Current | 9mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 35ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1426COA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Cut Tape (CT).This device is equipped with 2 drivers for its configuration.Surface Mount is mounted in the way.When the supply voltage is 4.5V~16V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.0°C~70°C TA is the allowed temperature range for this device.The input type is Inverting.It's configured with 8 terminations.There are numerous related parts listed under its base part number TC1426.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.2A.There are various useful electronic components in its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Having the maximum power dissipation of 470mW indicates its maximum capacity to conduct power losses without overheating.To maintain higher stability, the supply current should always be 9mA.The power supply of 4.5/16V is able to solve the power supply problems for a wide variety of applications.
TC1426COA713 Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1426COA713 Applications
There are a lot of Microchip Technology TC1426COA713 gate drivers applications.
- Portable Media Players
- Motor Controls
- PCMCIA applications
- High-voltage isolated DC-DC converters
- A/D drivers
- Power factor correction (PFC) circuits
- Digitally controlled power supplies
- Industrial Modules
- Dual-Battery Systems
- 3-Phase Motor Inverter Driver
