TC1426CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC1426 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 1.2A |
| Power Supplies | 4.5/16V |
| Nominal Supply Current | 13mA |
| Power Dissipation | 730mW |
| Output Current | 1.2A |
| Max Supply Current | 9mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 125 ps |
| Rise Time | 35ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 35ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Height | 4.064mm |
| Length | 10.16mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1426CPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is used.Ideally, it should be mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~16V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.For this device, the temperature range is 0°C~70°C TA.Inverting is the input type used in this program.Mosfet driver is based on 8 terminations.Under its base part number TC1426, various related parts can be found.In this case, Through Hole indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.2A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.On the board, there are 8 component pins.Mosfet driver is based on a basis of 2 outputs that have been integrated.An output current of 1.2A is supported.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.The supply current should be kept at 9mA to ensure higher stability.With its power supplies of 4.5/16V, it solves the power supply problems for diverse applications.
TC1426CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1426CPA Applications
There are a lot of Microchip Technology TC1426CPA gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Commercial air-conditioning (CAC)
- High-voltage isolated DC-DC converters
- Head-up and Head mounted displays
- Topologies
- Commercial and agricultural vehicles (CAV)
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- High frequency line drivers
- Motor Drives
