TC14433AEJG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-CDIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.45W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~8V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC14433A |
| Pin Count | 24 |
| Output Voltage | 5V |
| Operating Supply Voltage | 8V |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 1.4mA |
| Power Dissipation | 1.45W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Sampling Rate | 25 sps |
| Number of Analog In Channels | 1 |
| Max Dual Supply Voltage | 8V |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Conversion Rate | 25 sps |
| Analog Input Voltage-Max | 0.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC14433AEJG Overview
Tube-like packaging has been used here.Display drivers is included in the package version 24-CDIP (0.600, 15.24mm).As far as the display type of this electrical device is concerned, it is LED.Mounting this electronic component on the board is done using Through Hole.Display drivers is recommended that this electrical part be operated at a temperature of -40°C~85°C.I believe that it will work with a 4.5V~8VV power source.Transmission lines are terminated with 24 terminations using devices whose characteristic impedance matches that of the transmission line.Display drivers belongs to TC14433A family.A 24 pin makes up the entire device.As a result, it has 24 pins.This electronic part is mounted in the way of Through Hole.A voltage of 5V supplies power to it.For 1.4mA to function properly, it requires current supply.The same can also be done with Analog to Digital Converters.Optimal efficiency requires a supply voltage of 8V.5V is output by this device.Input voltage and output voltage are taken into account when the ADC, DUAL-SLOPE converter is selected.There are 1 analog In channels, which mean bandwidth in the electromagnetic spectrum capable of carrying one 1 standard television signal that is delivered in an analog format.For the design of this electronic component, 3 Bits were used.The number of channels is growing strongly/weakly: 1.
TC14433AEJG Features
24-CDIP (0.600, 15.24mm) package
TC14433A family
24 pin count
24 pins
ADC, DUAL-SLOPE converters
TC14433AEJG Applications
There are a lot of Microchip Technology TC14433AEJG display drivers applications.
- Bargraph Dlsplays
- Climate Controls
- Instrumentation Readouts
- Digital Clock, Thermometer, Counter,
- Car Audios / Radios
- Bar Graphs and Matrix Displays
- Industrial Controllers and Instrumentation
- Instrumentation Industrial Control
- Hand Held Instruments
- Digital Clock, Thermometer, Counter, Voltmeter
