TC14433AEPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.600, 15.24mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 940W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~8V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC14433A |
| Pin Count | 24 |
| Output Voltage | 5V |
| Operating Supply Voltage | 8V |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 1.4mA |
| Power Dissipation | 940mW |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Sampling Rate | 25 sps |
| Number of Analog In Channels | 1 |
| Max Dual Supply Voltage | 8V |
| Output Bit Code | BINARY |
| Power Consumption | 940mW |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Conversion Rate | 25 sps |
| Analog Input Voltage-Max | 0.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC14433AEPG Overview
Tube has been designed similarly to this package.In version 24-DIP (0.600, 15.24mm), it is included.This electrical device has a display type of LED, which is the display type of the device.An electronic component is mounted on a board using Through Hole.Display drivers is operating at -40°C~85°C degrees FahrenheDisplay drivers.Using a 4.5V~8VV power source should be sufficient.The 24 termination is used to terminate transmission lines with impedance-matched devices.Among the TC14433A family of devices, this is one.There are a total of 21 24 pins on the device.As a result, it has 24 pins.An electronic component is mounted on a board by way of a Through Hole-axis using the Through Hole-axis as a guide.A voltage of 5V supplies power to it.There is a need to supply 1.4mA with the necessary supply current for it to function at full capacity.The same can also be done with Analog to Digital Converters.A high level of efficiency can be achieved by maintaining the supply voltage at 8V.5V's output voltage is determined by this device.The source input voltage and the output voltage are used to determine ADC, DUAL-SLOPE converters.Analog In channels in the electromagnetic spectrum have 1 bandwidths.A 3 Bit was used to design this electronic component.The number of channels is growing strong/weak: 1.
TC14433AEPG Features
24-DIP (0.600, 15.24mm) package
TC14433A family
24 pin count
24 pins
ADC, DUAL-SLOPE converters
TC14433AEPG Applications
There are a lot of Microchip Technology TC14433AEPG display drivers applications.
- Professional Audio Equipment
- Wal4 and table clocks
- Battery Operated Products
- Portable lab instruments
- Digital Clock, Thermometer, Counter, Voltmeter
- LED Matrix Displays
- Instrumentation Industrial Control
- Mobile projector
- Smart Display
- Small Appliances
