TC14433COG
| Parameters | |
|---|---|
| Base Part Number | TC14433 |
| Pin Count | 24 |
| Output Voltage | 5V |
| Operating Supply Voltage | 8V |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 1.8mA |
| Power Dissipation | 940mW |
| Supply Current-Max | 7.4mA |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Sampling Rate | 25 sps |
| Number of Analog In Channels | 1 |
| Max Dual Supply Voltage | 8V |
| Output Bit Code | BINARY CODED DECIMAL |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Conversion Rate | 25 sps |
| Analog Input Voltage-Max | 0.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 940W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
TC14433COG Overview
The package follows the same design pattern as Tube.There is a version 24-SOIC (0.295, 7.50mm Width) of the package that includes it as part of it.I would like to point out that this electrical device has a LED display type.Mounting this electronic component on the board is done using Surface Mount.This electrical component operates at 0°C~70°C degrees Celsius.If you use a 4.5V~8VV power source, it should work.Typically, 28 terminations match the impedance of transmission lines.TC14433 devices are among the devices in this family.Display drivers is equipped wDisplay driversh 24 pin count.Display drivers is designed wDisplay driversh 24 pins.A Surface Mount axis is used to mount this electronic component on the board in order to get the best fit.Display drivers is powered from a supply voltage of 5V.A supply current is required for 1.8mA to fully function.Analog to Digital Converters can also include it as part of the equation.To ensure high efficiency, the supply voltage should be maintained at 8V.Using this function, you can obtain 5V's output voltage.The source input voltage and the output voltage are used to determine ADC, DUAL-SLOPE converters.1 analog In channels define bandwidth in electromagnetic spectrum.The number of channels is growing strongly/weakly: 1.
TC14433COG Features
24-SOIC (0.295, 7.50mm Width) package
TC14433 family
24 pin count
24 pins
ADC, DUAL-SLOPE converters
TC14433COG Applications
There are a lot of Microchip Technology TC14433COG display drivers applications.
- Mobile smart TV
- Car Audios / Radios
- Climate Controls
- Vacuum Fluorescent Displays
- COPS? or Microprocessor Displays
- Industrial control panels
- Home Automation Goods
- Set-Top Boxes
- General-purpose displays
- LED Matrix Displays
