TC14433ELI
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 4.5V~8V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC14433 |
| Pin Count | 28 |
| Output Voltage | 5V |
| Operating Supply Voltage | 8V |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 1.8mA |
| Power Dissipation | 1W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Sampling Rate | 25 sps |
| Number of Analog In Channels | 1 |
| Max Dual Supply Voltage | 8V |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Conversion Rate | 25 sps |
| Analog Input Voltage-Max | 0.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1W |
TC14433ELI Overview
Display drivers is packaged in the way of Tube.The package contains version 28-LCC (J-Lead) that includes it.As far as the display type of this electrical device is concerned, it is LED.The board mounts this electronic component using Surface Mount.Electrical parts like this operate at -40°C~85°C temperatures.Display drivers should work when powered by a 4.5V~8VV power source.The 28 termination is used to terminate transmission lines with impedance-matched devices.TC14433 devices are among the devices in this family.A device consists solely of 28 pins.As a matter of fact, it has 28 pins installed.Display drivers is mounted using the Surface Mount axis on the board, so that the component can be easily removed.Powered by a voltage of 5V, it is powered by a supply voltage of V.For 1.8mA to function properly, it requires current supply.Including it in Analog to Digital Converters is also possible.If high efficiency is to be achieved, the supply voltage should be maintained at 8V.Using this function, you can obtain 5V's output voltage.Depending on the source voltage and output voltage, ADC, DUAL-SLOPE converters are available.1 analog In channels define bandwidth in electromagnetic spectrum.Electronic parts such as this one were designed with 3 Bits.In terms of channel numbers, there has been a good/bad growth: 1.
TC14433ELI Features
28-LCC (J-Lead) package
TC14433 family
28 pin count
28 pins
ADC, DUAL-SLOPE converters
TC14433ELI Applications
There are a lot of Microchip Technology TC14433ELI display drivers applications.
- Avionics VFD Modules
- Set-Top Boxes
- Industrial Controllers and Instrumentation
- Bargraph Dlsplays
- Healthcare Products
- Panel meters
- Gaming Machines Security
- Driving low-voltag fluorescent displays
- Instrumentation Readouts
- Vacuum Fluorescent Displays
