Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-261-4, TO-261AA |
Number of Pins |
3 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1998 |
Series |
ECONOMONITOR™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC32M |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
JESD-30 Code |
R-PDSO-G4 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
200μA |
Nominal Supply Current |
200μA |
Max Supply Current |
200μA |
Adjustable Threshold |
NO |
Quiescent Current |
50μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
4.375V |
Number of Voltages Monitored |
1 |
Reset Timeout |
500ms Minimum |
Min Reset Threshold Voltage |
4.25V |
Max Reset Threshold Voltage |
4.5V |
Undervoltage Threshold |
4.25V |
Overvoltage Threshold |
4.5V |
Length |
6.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC32MCDB Overview
There are 4 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-261-4, TO-261AA functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 200μA volt supply current. It is always advisable to use TC32M, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. Voltage supervisor can work with a supply temperature of 200μA at the most. As the name implies, this supervisor is a kind of the famous ECONOMONITOR? series product line.
TC32MCDB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
TC32MCDB Applications
There are a lot of Microchip Technology TC32MCDB Voltage Supervisors applications.
- DC stabilized power supply module
- Low voltage/high power - AI, GPU
- Household appliances
- Battery cars
- Detection of phase loss
- Display equipment
- Leakage protection
- Radio
- Detection of phase sequence
- Kitchen appliances