TC32MCDB713
| Parameters | |
|---|---|
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 500ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | ECONOMONITOR™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC32M |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Quiescent Current | 50μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
TC32MCDB713 Overview
There are 4 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-261-4, TO-261AA functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 3 pins in it. Pin count of the power management is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.5V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. For this power management, there is an 200μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to TC32M, the base PMIC number. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 200μA. The IC power that you are looking at comes from our well-known ECONOMONITOR? series product line.
TC32MCDB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
TC32MCDB713 Applications
There are a lot of Microchip Technology TC32MCDB713 Voltage Supervisors applications.
- Power distribution systems of operating room
- DC stabilized power supply module
- Unattended substation automation
- DSP
- Digitally controlled LDO regulators circuit
- Military communications
- emergency room
- Insulation fault location system
- Kitchen appliances
- Cloud computing
