Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-226-3, TO-92-3 (TO-226AA) |
Number of Pins |
3 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Bulk |
Published |
2006 |
Series |
ECONOMONITOR™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
WIRE |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TC32M |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
200μA |
Nominal Supply Current |
200μA |
Max Supply Current |
200μA |
Adjustable Threshold |
NO |
Quiescent Current |
50μA |
Watchdog Timer |
Yes |
Reset |
Active Low |
Voltage - Threshold |
4.375V |
Number of Voltages Monitored |
1 |
Reset Timeout |
500ms Minimum |
Min Reset Threshold Voltage |
4.25V |
Max Reset Threshold Voltage |
4.5V |
Undervoltage Threshold |
4.25V |
Overvoltage Threshold |
4.5V |
Height |
5.33mm |
Length |
5.21mm |
Width |
4.19mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC32MCZB Overview
Power management is mounted through 3 terminals. Packaging is in the form of a Bulk. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management conducts in a 5V-voltage supply. Power ics operate at 1 supply voltages. Power management is included in the Through Hole mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 3 pins that are attached to IC management. Power managment ic pin count is 3. Supply voltage (Vsup) should be at least 4.5V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 200μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to TC32M, the base PMIC number. The power management must be powered by 5V volts to function properly. The maximum supply temperature voltage supervisor can handle is 200μA. It is one of the well-known ECONOMONITOR? series power ic line.
TC32MCZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
TC32MCZB Applications
There are a lot of Microchip Technology TC32MCZB Voltage Supervisors applications.
- Smartphones
- Important electronics for automotive protection
- Solar power charger
- Power distribution systems of ICU
- Rechargeable batteries
- Low voltage/high power - AI, GPU
- Detection of phase sequence
- emergency room
- Sensitive sensors
- DC stabilized power supply module