TC32MEDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | ECONOMONITOR™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC32M |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| JESD-30 Code | R-PDSO-G4 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Quiescent Current | 50μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 500ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC32MEDB Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Packaged in a Tube-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-261-4, TO-261AA functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.5V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 200μA. A similar IC managements number of the manufacturer can always be found by using TC32M, the base power ics number. It requires 5V watts of power to operate this voltage supervisor. At the most, voltage supervisor can work with a supply temperature of 200μA. The IC power comes from the well-known ECONOMONITOR? series.
TC32MEDB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
TC32MEDB Applications
There are a lot of Microchip Technology TC32MEDB Voltage Supervisors applications.
- DSP
- Low voltage/high power - AI, GPU
- Military electronics
- Network equipment
- Microprocessor system
- FPGA design
- Important electronics for automotive safety
- Detection of phase imbalance
- Microcontroller system
- Medical-specific insulation monitor
