TC426COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC426COA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.Configuration is based on 2 drivers.Surface Mount is mounted in the way of the device.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device allows temperatures in the range of 0°C~70°C TA.The input type for this program is Inverting.8 terminations constitute its foundation.There are various parts that can be found under its base part number TC426.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.There are several useful electronic components in this subcategory of MOSFET Drivers.On the board, there are 8 component pins.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended to keep the supply current at 8mA to ensure greater stabilMosfet gate driversy.A voltage of 16V should be set for the operating supply voltage.
TC426COA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC426COA713 Applications
There are a lot of Microchip Technology TC426COA713 gate drivers applications.
- Active filtering
- Topologies
- 3-Phase Motor Inverter Driver
- High power buffers
- Portable Media Players
- Isolated Gate Driver Supplies
- Welding
- Industrial motor drives - compact, standard, premium, servo drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Digitally controlled power supplies
