TC426CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC426 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC426CPA Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube represents the packaging method.Gate drivers is mounted in the way of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as 0°C~70°C TA.A type of Inverting is used for input in this program.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC426.The device is mounted with Through Hole.The pins are configured with 8 when designing the chip.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A that can be achieved.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.Based on its basis, it integrates 2 outputs.1.5A is the maximum output current supported by the device.The maximum power dissipation of 730mW shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 8mA.As a result, a voltage of 18V is produced.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 16V.
TC426CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC426CPA Applications
There are a lot of Microchip Technology TC426CPA gate drivers applications.
- Portable Navigation Devices
- Head-up and Head mounted displays
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Industrial Power Supplies
- Dual-Battery Systems
- DC/DC converters
- Uninterruptible Power Supplies (UPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated switch mode power supplies (SMPS)
