TC426EOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC426EOA Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is package in Tube case.2 drivers are incorporated for its configuration.Its recommended mounting way is Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.Temperature range -40°C~85°C TA is allowed for this device.This program uses the input type of Inverting.8 terminations constitute its foundation.You will find various related parts under the base part number TC426.Mounting the device requires Surface Mount.There are 8 pins available in the device.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is an output current limit of 1.5A for this device.Within this subcategory of MOSFET Drivers, there are several useful electronic components.8 pins are present on the component.An output current of 1.5A is supported.Having the maximum power dissipation of 470mW indicates its maximum capacity to conduct power losses without overheating.To ensure high stability, the supply current should be kept at 8mA.The operating supply voltage should be set at 16V.
TC426EOA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC426EOA Applications
There are a lot of Microchip Technology TC426EOA gate drivers applications.
- Automotive Applications
- High current laser/LED systems
- 3-Phase Motor Inverter Driver
- Commercial and agricultural vehicles (CAV)
- Portable Media Players
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Digitally controlled power supplies
- Head-up and Head mounted displays
- Solar power supplies
