TC426EOA713
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
TC426EOA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.2 drivers are incorporated for its configuration.In the direction of Surface Mount, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.There is a gate type of N-Channel, P-Channel MOSFET in this design.-40°C~85°C TA is the allowed temperature range for this device.Mosfet driver accepts input of type Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number TC426.Mosfet driver is mounted using Surface Mount.Devices have 8 pins available.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.There are several useful electronic components within its subcategory MOSFET Drivers.A board with 8 component pins is available.Based on its maximum power dissipation of 470mW, it is clear that it is capable of transferring and conducting power loss without overheating.To maintain higher stability, the supply current should always be 8mA.During the operation of the system, the voltage of the operating supply should be set to 16V.
TC426EOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC426EOA713 Applications
There are a lot of Microchip Technology TC426EOA713 gate drivers applications.
- Dual-Battery Systems
- Head-up and Head mounted displays
- Power factor correction (PFC) circuits
- Topologies
- Active filtering
- Digitally controlled power supplies
- Motor Controls
- Portable Media Players
- Broadcast equipment
- Isolated switch mode power supplies (SMPS)
