TC426IJA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 800mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC426IJA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-CDIP (0.300, 7.62mm) package.Tube represents the package.2 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.This device is designed with a N-Channel, P-Channel MOSFET gate type.-25°C~85°C TA is the allowed temperature range for this device.Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC426.The device is mounted with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 1.5A that can be achieved.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.The maximum power dissipation of 800mW shows its maximum capability to transfer and conduct power loss without overheating.The supply current should be kept at 8mA to ensure higher stability.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.
TC426IJA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 800mW
TC426IJA Applications
There are a lot of Microchip Technology TC426IJA gate drivers applications.
- DC/DC converters
- Portable Navigation Devices
- AC-DC Inverters
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated switch mode power supplies (SMPS)
- Industrial motor drives - compact, standard, premium, servo drives
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Drives
