TC427COA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC427 |
| Pin Count | 8 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC427COA Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tube represents the package.Configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.0°C~70°C TA is the allowed temperature range for this device.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.Many related parts can be found under its base part number TC427.In this case, Surface Mount indicates how the device is mounted.The pins are configured with 8 when designing the chip.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.1.5A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.8 pins are present on the component.This device supports a current output of 1.5A at the output.Using 470mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 8mA.In this case, the voltage is 18V.Mosfet gate drivers is recommended that 16V be set as the operating supply voltage.
TC427COA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC427COA Applications
There are a lot of Microchip Technology TC427COA gate drivers applications.
- Solar inverters
- Motor controllers
- Isolated Supplies for Motor Control
- Video amplifiers
- Topologies
- Portable computers
- Motor Control
- Motor Controls
- Telecom switch mode power supplies
- Industrial Modules
