TC427CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC427 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Interface | RS-232 |
| Memory Size | 7kB |
| Nominal Supply Current | 8mA |
| RAM Size | 176B |
| Memory Type | EPROM |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 1 |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Max Frequency | 4MHz |
| Channel Type | Independent |
| Number of Programmable I/O | 22 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC427CPA Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube is the packaging method.The device is mounted in the direction of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as 0°C~70°C TA.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 8 terminations.Numerous related parts can be found under its base part number TC427.Through Hole is the way it takes to mount the device.At the time of design, it is configured with 8 pins.An output current as high as 1.5A can be achieved at maximum power.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A total of 8 pins are available for component connections.There are 2 outputs integrated for its basis.This device supports a current output of 1.5A at the output.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.For higher stability, the supply current should be kept at 8mA.The voltage it outputs is 18V.The operating supply voltage should be set at 16V.
TC427CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC427CPA Applications
There are a lot of Microchip Technology TC427CPA gate drivers applications.
- Portable Media Players
- Motor controllers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Controls
- Isolated Supplies for controller area network (CAN),
- Video amplifiers
- Industrial Motor Inverter - Power Tools, Robotics
- Broadcast equipment
- High frequency line drivers
- White Goods - Air Conditioner, Washing Machine,
