TC427EOA713
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC427 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
TC427EOA713 Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tape & Reel (TR) is indicated.This device is equipped with 2 drivers for its configuration.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~85°C TA.The input type for this program is Non-Inverting.The configuration is based on 8 terminations.The base part number TC427 refers to a number of related parts.Surface Mount is the way it takes to mount the device.Devices have 8 pins available.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.1.5A is the maximum output current.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has 8 component pins.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.The supply current should be kept at 8mA to ensure higher stability.During the operation of the system, the voltage of the operating supply should be set to 16V.
TC427EOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC427EOA713 Applications
There are a lot of Microchip Technology TC427EOA713 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- PCMCIA applications
- Digitally controlled power supplies
- Portable Navigation Devices
- White Goods - Air Conditioner, Washing Machine,
- Motor Controls
- Line drivers
- Isolated Supplies for Motor Control
- DC-DC Converters
- Solar inverters
