TC427MJA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC427 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Voltage | 18V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 800mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 3.8mm |
| Length | 9.78mm |
| Width | 6.73mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC427MJA Overview
For greater flexibility, its 8-CDIP (0.300, 7.62mm) package is used.Gate drivers is packaged in the way of Tube.A total of 2 drivers are integrated into its configuration.Through Hole is mounted in the way.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.Temperature range -55°C~125°C TA is allowed for this device.Non-Inverting is used as its input type.Mosfet driver is based on 8 terminations.Many related parts can be found under its base part number TC427.Devices are mounted by Through Hole.There are 8 pins available in the device.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 1.5A.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Its maximum power dissipation of 800mW shows its power loss capacity without overheating.To ensure high stability, the supply current should be kept at 8mA.In order to operate properly, the operating supply voltage should be set to 16V.
TC427MJA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 800mW
TC427MJA Applications
There are a lot of Microchip Technology TC427MJA gate drivers applications.
- UPS systems
- Solar power supplies
- Line drivers
- 3-Phase Motor Inverter Driver
- High frequency line drivers
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial motor drives - compact, standard, premium, servo drives
- Automotive Applications
- Smart Phones
