TC428COA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC428 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC428COA Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.There is a mounting bracket in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of 0°C~70°C TA.Inverting, Non-Inverting is used as its input type.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number TC428.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 1.5A.There are several useful electronic components within its subcategory MOSFET Drivers.The board contains 8 pins for component connections.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 8mA.As a rule of thumb, the operating supply voltage should be set to 16V.
TC428COA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC428COA Applications
There are a lot of Microchip Technology TC428COA gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Power factor correction (PFC) circuits
- High-voltage isolated DC-DC converters
- Solar inverters
- High-speed communications
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Welding
- Automotive Applications
- Topologies
