TC428COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC428 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 16V |
| Nominal Supply Current | 8mA |
| Power Dissipation | 470mW |
| Max Supply Current | 8mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 30ns 30ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC428COA713 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.A package of Tape & Reel (TR) has been used.Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.This gate type has a N-Channel, P-Channel MOSFET design.0°C~70°C TA is the allowed temperature range for this device.Inverting, Non-Inverting is used as its input type.Its configuration starts with 8 terminations.There are numerous related parts listed under its base part number TC428.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 1.5A.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.This device has a maximum power dissipation of 470mW, indicating that it is capable of reducing power loss without overheating.The supply current should be kept at 8mA to ensure higher stability.Mosfet gate drivers is recommended that the operating supply voltage be set to 16V volts.
TC428COA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC428COA713 Applications
There are a lot of Microchip Technology TC428COA713 gate drivers applications.
- Isolated Gate Driver Supplies
- Portable computers
- Motor Control
- Dual-Battery Systems
- Isolated Supplies for controller area network (CAN),
- General Purpose 3-Phase Inverter
- High-speed communications
- A/D drivers
- UPS systems
- DC-DC Converters
