TC429EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC429 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 12mA |
| Power Dissipation | 470mW |
| Max Supply Current | 5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC429EOA713 Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is packaged in the way of Tape & Reel (TR).A total of 1 drivers are integrated into its configuration.In the direction of Surface Mount, gate drivers is mounted.In the absence of a power supply voltage of 7V~18V V, it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.This program uses the input type of Inverting.Mosfet driver is based on 8 terminations.Many related parts can be found under its base part number TC429.Devices are mounted by Surface Mount.During design, it is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 6A volts.Its subcategory of MOSFET Drivers contains various useful electronic components.Components with 8 pins are available.The maximum power dissipation of 470mW shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 5mA in order to achieve greater stabilMosfet gate driversy.
TC429EOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC429EOA713 Applications
There are a lot of Microchip Technology TC429EOA713 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Control
- Digitally controlled power supplies
- Isolated Supplies for Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Telecom switch mode power supplies
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- AC-DC Inverters
- Isolated switch mode power supplies (SMPS)
