Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
MOSFET Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Base Part Number |
TC4403 |
Pin Count |
8 |
Number of Outputs |
2 |
Output Voltage |
17.975V |
Output Type |
N-Channel |
Max Output Current |
1.5A |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
On/Off |
Nominal Supply Current |
2.5mA |
Output Configuration |
Low Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
2.5mA |
Propagation Delay |
75 ns |
Turn On Delay Time |
75 ns |
Switch Type |
General Purpose |
Rise Time |
35ns |
Fall Time (Typ) |
35 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~18V |
Turn On Time |
0.1 μs |
Output Peak Current Limit-Nom |
1.5A |
Rds On (Typ) |
2.8m Ω |
High Side Driver |
NO |
Turn Off Time |
0.1 μs |
Height |
4.06mm |
Length |
10.16mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC4403EPA Overview
Tube is the way it's packaged.This package is included in 8-DIP (0.300, 7.62mm).Mounting type Through Hole is selected for the LED driving board.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 2.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.The TC4403 family consists of this type.In total, there are 8 terminations.The 8 pins are used for the operation of the system.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The lighting driver is mounted in the direction of Through Hole.The LED driver has a total of 8 pins.When this is the case, the output current is set to 1.5A.It is self-contained in an econtainer with a capacity of MOSFET Drivers.Normal operation requires a voltage above 4.5V for the supply voltage.For its operation, a maximum current requirement of 2.5mA is required.
TC4403EPA Features
TC4403EPA Applications
There are a lot of Microchip Technology TC4403EPA Power Switches ICs applications.
- USB Protection
- Solid State Drivers
- Mobile Communication Devices
- Portable Devices
- Hot Swap
- USB Power Distribution
- Storage Drives
- Portable GPS
- USB Ports/Hubs
- Portable Video Game Players