Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC4404 |
Pin Count |
8 |
Max Output Current |
1.5A |
Operating Supply Voltage |
15V |
Nominal Supply Current |
4.5mA |
Power Dissipation |
470mW |
Max Supply Current |
4.5mA |
Propagation Delay |
50 ns |
Input Type |
Inverting |
Turn On Delay Time |
50 ns |
Rise Time |
30ns |
Fall Time (Typ) |
30 ns |
Rise / Fall Time (Typ) |
40ns 40ns Max |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Turn On Time |
0.04 μs |
Output Peak Current Limit-Nom |
1.5A |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.5A 1.5A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.4V |
Turn Off Time |
0.06 μs |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC4404COA Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tube represents the package.The configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.For this device, the temperature range is 0°C~70°C TA.Inverting is the input type used in this program.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4404.Mosfet driver is mounted using Surface Mount.The pins are configured with 8 when designing the chip.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Using 470mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 4.5mA.In order to operate properly, the operating supply voltage should be set to 15V.
TC4404COA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4404COA Applications
There are a lot of Microchip Technology TC4404COA gate drivers applications.
- Smart Phones
- Solar power supplies
- Isolated Supplies for Motor Control
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
- Portable computers
- Broadcast equipment
- Digitally controlled power supplies
- High-speed communications
- RGB applications