TC4404CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4404 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 40ns Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4404CPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.There is a package in the form of Tube.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Through Hole.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.0°C~70°C TA is the allowed temperature range for this device.Mosfet driver accepts input of type Inverting.Mosfet driver is based on 8 terminations.There are numerous related parts listed under its base part number TC4404.In this case, Through Hole indicates how the device is to be mounted.There are 8 pins available in the device.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 1.5A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Components with 8 pins are available.Its maximum power dissipation of 730mW shows its power loss capacity without overheating.The supply current should be kept at 4.5mA to ensure higher stability.Mosfet gate drivers is recommended that you set the operating supply voltage to 15V.The operation channel configuration is 1.
TC4404CPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4404CPA Applications
There are a lot of Microchip Technology TC4404CPA gate drivers applications.
- Line drivers
- serial peripheral interface (SPI), I2C
- High frequency line drivers
- Portable Navigation Devices
- High power buffers
- Smart Phones
- Welding
- RGB applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- PCMCIA applications
