TC4405CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Number of Functions | 2 |
| Base Part Number | TC4405 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Element Configuration | Dual |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 40ns Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4405CPA Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the packaging method.The device is mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device is allowed to operate in a temperature range of 0°C~70°C TA.Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.The base part number TC4405 refers to a number of related parts.Mounting the device requires Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 1.5A limit to the output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has a total of 8 component pins.The basis of the model has 2 outputs integrated.Based on the maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To maintain higher stability, the supply current should always be 4.5mA.Setting the operating supply voltage to 15V is recommended.
TC4405CPA Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4405CPA Applications
There are a lot of Microchip Technology TC4405CPA gate drivers applications.
- Motor Drives
- Topologies
- Commercial air-conditioning (CAC)
- PCMCIA applications
- Portable Navigation Devices
- Industrial Modules
- 3-Phase Motor Inverter Driver
- Motor controllers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
