Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC4405 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Max Output Current |
1.5A |
Operating Supply Voltage |
15V |
Nominal Supply Current |
4.5mA |
Power Dissipation |
470mW |
Max Supply Current |
4.5mA |
Propagation Delay |
50 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
50 ns |
Rise Time |
30ns |
Fall Time (Typ) |
30 ns |
Rise / Fall Time (Typ) |
40ns 40ns Max |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Drivers |
2 |
Turn On Time |
0.04 μs |
Output Peak Current Limit-Nom |
1.5A |
Driven Configuration |
Low-Side |
Gate Type |
IGBT, N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.5A 1.5A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.4V |
Turn Off Time |
0.06 μs |
Height |
1.5mm |
Length |
5mm |
Width |
3.99mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC4405EOA Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A packaging method of Tube is used.A total of 2 drivers are integrated into its configuration.There is a mounting bracket in the way of Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~85°C TA.Non-Inverting is used as the input type in this program.The configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4405.Mosfet driver is mounted using Surface Mount.There are 8 pins available in the device.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.The maximum output current can amount to 1.5A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.As a rule of thumb, the operating supply voltage should be set to 15V.
TC4405EOA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4405EOA Applications
There are a lot of Microchip Technology TC4405EOA gate drivers applications.
- Industrial Power Supplies
- High frequency line drivers
- Solar power supplies
- Isolated switch mode power supplies (SMPS)
- Topologies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Refrigerator
- PCMCIA applications
- Pulse transformer drivers
- Isolated Supplies for controller area network (CAN),