TC4405EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4405 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 40ns Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4405EOA713 Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is package in Tape & Reel (TR) case.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This device is designed with a IGBT, N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~85°C TA.Non-Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.There are various related parts under its base part number TC4405.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 1.5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.As a rule of thumb, the operating supply voltage should be set to 15V.
TC4405EOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4405EOA713 Applications
There are a lot of Microchip Technology TC4405EOA713 gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Power factor correction (PFC) circuits
- High power buffers
- Welding
- AC-DC Inverters
- Commercial air-conditioning (CAC)
- Isolated switch mode power supplies (SMPS)
- 3-Phase Motor Inverter Driver
- Motor Controls
- Motor Control
