TC4405EPA
| Parameters | |
|---|---|
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4405 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 40ns Max |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
TC4405EPA Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A package of Tube has been used.There are 2 drivers installed for this device.It's mounted on the way to Through Hole.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~85°C TA.Non-Inverting is the input type used in this program.Mosfet driver is based on 8 terminations.Under its base part number TC4405, various related parts can be found.Mosfet driver is mounted using the Through Hole method.There are 8 pins available in the device.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.5A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Components with 8 pins are available.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 4.5mA.A voltage of 15V should be set for the operating supply voltage.
TC4405EPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4405EPA Applications
There are a lot of Microchip Technology TC4405EPA gate drivers applications.
- Welding
- Motor controllers
- PCMCIA applications
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Gate Driver Supplies
- Solar inverters
- Portable Navigation Devices
- RGB applications
- Commercial air-conditioning (CAC)
- Pulse transformer drivers
